fiber optic terminal box frame 72 core (ODF)

fiber optic terminal box frame 72 core (ODF)
1.12 fiber spllice tray
2. 19 standard mounting
3.FC/SC/ST types of adapter

 

fiber optic terminal box frame 72 core (ODF)

 

Fiber Management Tray also called ODF Distribution Box, Integrated Splicing and Distribution ODF. It is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. Users can select unit or ring flange amount according to their practical needs

 

Specifications:
Technical Indexes
1) Working temperature: -5°C - +40°C
2) Environmental temperature: -25°C - +55°C
3) Relative humidity: ≤85%((when the temperature is below 30°C))
4) Atmosphere pressure: 70 Kpa～106Kpa
5) Insertion loss: ≤0.3dB
6) Return loss: PC≥40 dB UPC≥50dB APC≥60dB
7) Insulating resistance between the box and the earthing device:1000MΩ/500VDC
8) Voltage-resistance between the box and the earthing device: Under the effect of 3kv/DC/1min, non-puncture, and no arc-over.
Features:
Features
• 19″standard mounting design with static electric plastic sprayed, nice appearance;
• Can be used for ribbon & bunch fiber cables;
• FC/SC/ST types of adapters could be plugged in;
• Clear fiber route, pigtails could be coiled and stored on the tray;
• It is flexible for installation and convenient for operation and maintenance.

 

Through the clever use of the module to achiever fusion and wiring as a whole. Can access FC.SC two adapter, adapters and equipment installed on the positive angle of 35 degrees was not only assures the optical radius of curvature, but also to avoid the laser burns people's eyes. Applies to non-ribbon optical fiber ribbon. Sub box for 19-inch, 21 inch patch panel fiber optic patch panels and integrated.

Features:

(1) Unit modular design, simple structure, convenience of operation, identify clear, flexible expansion.

(2) 24 core units and 72 core units can be optional according to frame size, the box can be left and right side out cable, flexible operation. With limited positioning guide structure, the module out and fixed easily.They are all suit for 19"standard frame

(3) Into a single convenient cable to connect the high density of wiring. At the same time as the cable core to provide the best protection.

(4)The optical properties to meet the company's fiber optic equipments performance.